The 2009 Porsche GT3 RSR
Technical Description Porsche GT3 RSR (2009)
Engine:
Water-cooled, six-cylinder boxer engine; four valves
per cylinder; dry sump lubrication; individual throttle
butterflies; fuel injection; air restrictors 2 x 29.5 mm.
Bore:
102.7 mm
Stroke:
80.4 mm
Capacity:
3,996 cc
Power output:
331 kW (450 bhp) at 7,800 rpm
Max. Torque:
430 Nm at 7,250 rpm
Max. revs:
9,400 rpm
Transmission:
Six-speed gearbox with sequential jaw-type shift;
oil/water heat exchanger; single-mass flywheel;
hydraulic disengagement lever; three-plate carbon-fibre
clutch; rear wheel drive; limited-slip differential 45/65%.
Body:
Monocoque body (basis GT3 RS) of hot-galvanised steel;
aerodynamically optimised front end with front spoiler;
aerodynamically optimised front underfloor; adjustable
rear wing; 90-litre safety fuel tank with fast filling function;
air jack; welded-in safety cage; bucket-type racing seat
(on driver's side only) with flame-resistant seat cover;
six-point seat belt adapted for use of the HANS
Head and Neck Support; electric fire-extinguishing system.
Suspension:
Front:
McPherson spring strut axle; Sachs four-way gas
pressure dampers; double coil springs (main and ancillary
spring); front axle arms adjustable for camber; adjustable
sword-type anti-roll bar on both sides; power steering.
Rear:
Multi-arm axle with rigidly mounted axle sub-frame;
Sachs four-way gas pressure dampers; double coil springs
(main and auxiliary spring); rear axle tie-bar reinforced
and infinitely adjustable; adjustable sword-type anti-roll
bar on both sides.
Complete suspension infinitely adjustable (height,
camber, track).
Brakes:
Brake system with balance bar control.
Front:
Single-piece six-piston aluminium fixed callipers;
inner-vented, 380 mm in diameter; racing brake pads.
Rear: Single-piece four-piston aluminium fixed callipers;
inner-vented, 355 mm in diameter; racing brake pads.
Wheels:
Front:
Three-piece BBS light-alloy wheels (11J x 18-34);
central bolt;
Rear:
Three-piece BBS light-alloy wheels (13J x 18-12.5);
central bolt.
Electrical System:
Motec display with integrated data recording; multi-function
display with integrated gearshift indicator; adjustable
traction control; battery: 12 volt, 50 Ah, 140 Ah alternator.
Weight:
Approx. 1,220 kg complying with A.C.O. regulations,
1,245 kg complying with FIA regulations.
Porsche unleashed its latest model of its GT2-class race car, the 2009 Porsche GT3 RSR. With a new louvered hood as it's visual difference. The car's radiator ductwork has been redesigned for the racer's preferred air conditioning system. They also included a developed supply system for a consistently adaptable blink rate of its front lights. Which makes it easy to identify when car pits during night time. The GT3 is also equipped with a new air jack and a much easier accessed oil filler which has been relocated.
Now that comprises the visual part of the GT3. Lets go to a much better topic, the POWER. The 2009 Porsche GT3 RSR is equipped with a 450 horsepower at 7,800 RPM (compared to last year producing 465 horsepower at 8,000 RPM) with a displacement for the rear-mounted 6-cylinder from 3.8 up to 4.0 liters. Same with last year's GT, GT3 is also powered by a 317 lb-ft of torque at 7,250 RPM. Porsche said that the new GT3's torque curve is well-optimized than the past model for better driving. The 2009 Porsche GT3 RSR will cost you at around $493,392.
Technical Description Porsche GT3 RSR (2009)
Engine:
Water-cooled, six-cylinder boxer engine; four valves
per cylinder; dry sump lubrication; individual throttle
butterflies; fuel injection; air restrictors 2 x 29.5 mm.
Bore:
102.7 mm
Stroke:
80.4 mm
Capacity:
3,996 cc
Power output:
331 kW (450 bhp) at 7,800 rpm
Max. Torque:
430 Nm at 7,250 rpm
Max. revs:
9,400 rpm
Transmission:
Six-speed gearbox with sequential jaw-type shift;
oil/water heat exchanger; single-mass flywheel;
hydraulic disengagement lever; three-plate carbon-fibre
clutch; rear wheel drive; limited-slip differential 45/65%.
Body:
Monocoque body (basis GT3 RS) of hot-galvanised steel;
aerodynamically optimised front end with front spoiler;
aerodynamically optimised front underfloor; adjustable
rear wing; 90-litre safety fuel tank with fast filling function;
air jack; welded-in safety cage; bucket-type racing seat
(on driver's side only) with flame-resistant seat cover;
six-point seat belt adapted for use of the HANS
Head and Neck Support; electric fire-extinguishing system.
Suspension:
Front:
McPherson spring strut axle; Sachs four-way gas
pressure dampers; double coil springs (main and ancillary
spring); front axle arms adjustable for camber; adjustable
sword-type anti-roll bar on both sides; power steering.
Rear:
Multi-arm axle with rigidly mounted axle sub-frame;
Sachs four-way gas pressure dampers; double coil springs
(main and auxiliary spring); rear axle tie-bar reinforced
and infinitely adjustable; adjustable sword-type anti-roll
bar on both sides.
Complete suspension infinitely adjustable (height,
camber, track).
Brakes:
Brake system with balance bar control.
Front:
Single-piece six-piston aluminium fixed callipers;
inner-vented, 380 mm in diameter; racing brake pads.
Rear: Single-piece four-piston aluminium fixed callipers;
inner-vented, 355 mm in diameter; racing brake pads.
Wheels:
Front:
Three-piece BBS light-alloy wheels (11J x 18-34);
central bolt;
Rear:
Three-piece BBS light-alloy wheels (13J x 18-12.5);
central bolt.
Electrical System:
Motec display with integrated data recording; multi-function
display with integrated gearshift indicator; adjustable
traction control; battery: 12 volt, 50 Ah, 140 Ah alternator.
Weight:
Approx. 1,220 kg complying with A.C.O. regulations,
1,245 kg complying with FIA regulations.
